VOSviewer
Courses
- OTOptical Testing
- IOEIntroductory Optomechanical Engineering
- DIDiffraction and Interferometry
Grants
- Simulating Color Perception Through HEVL Contact Lenses
Principal Investigator (PI)
2023
$21.4K
Active - Aspera: Revealing the Diffuse Universe
Co-Investigator (COI)
2022
$10.2M
Active - Ultrafast Laser Stress Figuring (ULSF) of Thin Optics
Co-Investigator (COI)
2022
$76.5K
Active - Focal Plane Development for D2S3
Key Personnel (KP)
2022
$68.0K
Active - Semiconductor Defect Inspection Simulation and Its UV Lens Module Performance Evaluation
Co-Investigator (COI)
2021
$468.6K
Active - UA II-VI Deflectometry Project
Principal Investigator (PI)
2021
$160.0K
Active - Rapid and Inexpensive Thermoforming Technology for Precision Radio Telescope Reflector Panels
Co-Investigator (COI)
2020
$952.4K
Active - Stochastic Parallel Gradient Descent Based Beam-Aiming Algorithm Development
Principal Investigator (PI)
2020
$40.0K
Active - Ultralight Very Large Aperture Space Telescopes Using MODE Lens Technology
Co-Investigator (COI)
2018
$1.5M
Active - Aspera: Revealing the Diffuse Universe
Co-Investigator (COI)
2021
$1.3M
Publications (170)
Recent
- Statistical Tool Size Study for Computer-Controlled Optical Surfacing
2023
- All reflective THz telescope design with an inflatable primary antenna for Orbiting Astronomical Satellite for Investigating Stellar Systems (OASIS) mission
2021
- Mid-to-high frequency characterization of inflatable membrane optics
2021
- Advances in reconfigurable optical design, metrology, characterization, and data analysis
2021
- Wavefront-based Optical Alignment of Confocal Off-Axis Freeform Reflective System
2021
- Deflectometry-based thermal vacuum testing for a pneumatic terahertz antenna
2021
- Smoothing Effect Analysis for Active Fluid Jet Polishing
2021
- Design and calibration of a closed loop tip-tilt control for a pyramid-Shack-Hartmann hybrid wave-front sensor
2021
- PhoSim (Photon Simulator) Reliability Test for Confocal Off-Axis System
2021
- Error Compensation Software to Remove the Low-Frequency Error of Aluminum Freeform Mirror for an Infrared Off-Axis Telescope
2021
- Stressed deformable reflector design and pneumatic membrane antenna for cryogenic thermal vacuum chamber testing
2021
- Unobscured Two-Mirror Confocal Optical System Analysis Using Application to Photon Simulator (PhoSim)
2021
- Advances in Optical Engineering for Future Telescopes
2021
- Vector Polynomials for Gradient Metrology Data Processing
2021
- Grating lobe suppression for the next generation Arecibo Telescope concept
2021
- Meter-Class Infrared Deflectometry for Visibly Non-Specular Surface Metrology
2021
- Fringe Projection Metrology for Thermoformed Millimeter Wave Freeform Optical Elements
2021
- Scalable optical design and technology for extremely large space telescopes
2021
- Long-slit cross-dispersion spectroscopy for Hyperion UV space telescope
2021
- Parametric Tool Influence Function Size Optimization
2021
- Optical Design and Acceptable Tolerance Range of MESSIER satellite telescope (LAF TMS D400F3)
2021
- Electromagnetic Thermoforming to Manufacture Reflective Panels for Radio Telescopes and Downlinks
2021
- Analytical and finite element analysis tool for nonlinear membrane antenna modeling for astronomical applications
2021
- Parametric design study of the Orbiting Astronomical Satellite for Investigating Stellar Systems (OASIS) space telescope
2021
- Computational vector fiducial for deflectometry system alignment
2021
- Multiplexed Computer Controlled Optical Surfacing using Multiple Tools
2021
- Adaptive Aluminum Thermoforming for Precision Millimeter Wave Telescope Panels
2021
- Inflatable Space Terahertz Optics Technology
2021
- Cosmic evolution through UV surveys (CETUS): point spread function analysis of three mirror anastigmat telescope
2021
- Lightweight Aluminum Mirror with Duplex Layers
2021
- Optical Design and Tolerance Analysis of a Three-Mirror Freeform Telescope for the MESSIER Surveyor Mission
2021
- The versatile CubeSat Telescope: going to large apertures in small spacecraft
2021
- Parametric Mid-Spatial Frequency Surface Error Synthesis
2021
- Universal dwell time optimization for deterministic optics fabrication
2021
- Aspera: the UV SmallSat telescope to detect and map the warm-hot gas phase in nearby galaxy halos
2021
- The evolution of OPTI513 Optical Testing course at the Wyant College of Optical Sciences
2021
- Optical front-end for a quantum key distribution cubesat
2021
- Orbiting Astronomical Satellite for Investigating Stellar Systems (OASIS): following the water trail from the interstellar medium to oceans
2021
- OASIS architecture: key features
2021
- Surface Treatment Regimes for Solar Scatter Control in Millimeter Wave Telescope Panels
2021
- Optical technology for future telescopes
2021
- In-process surface roughness measuring device for information-based real-time polishing process adjustment and optimization
2021
- RISE: robust iterative surface extension for sub-nanometer X-ray mirror fabrication
2021
- Polarized imaging interpreter for simultaneous clocking metrology of multiple objects
2021
- Dual-tool multiplexing model of parallel computer controlled optical surfacing
2020
- Parametric removal rate survey study and numerical modeling for deterministic optics manufacturing
2020
- A laser-truss based optical alignment system on LBT
2020
- Two-dimensional Fourier domain Ronchi ruling measurement using Talbot-based crossing point modeling
2020
- Progress toward optical design and fabrication of ultralight, large aperture transmissive lenses for space telescopes
2020
- Development of a position--velocity--time-modulated two-dimensional ion beam figuring system for synchrotron x-ray mirror fabrication
2020
- Non-planar illumination sources for deflectometry
2020
- Full-aperture optical metrology for inflatable membrane mirrors
2020
- Disruptive space telescope concepts, designs, and developments: OASIS and Nautilus -INVITED
2020
- RIFTA: A Robust Iterative Fourier Transform-based dwell time Algorithm for ultra-precision ion beam figuring of synchrotron mirrors
2020
- Topological pupil segmentation and point spread function analysis for large aperture imaging systems
2020
- Alignment of Multi-Order Diffractive Engineered (MODE) lens segments using the Kinematically-Engaged Yoke System
2020
- Tolerance analysis of wide field of view confocal off-axis telescope system using freeform mirrors for common optics MWIR/LWIR sensors onboard UAVs: linear astigmatism free three mirror system D70F1.4
2020
- Manufacture of 8.4 m segments for the GMT primary mirror
2020
- Interference of two diverging beams reflected from a plane parallel plate: stationary fringes with characteristic stable period
2020
- Optical sensitivity analyses of various reflective systems: on-axis, common off-axis, and confocal off-axis designs
2020
- Implementation of a laser-truss based telescope metrology system at the Large Binocular Telescope
2020
- Multizonal Design Multifocal Intraocular Lens-Induced Astigmatism According to Orientation.
2020
- Design of the vacuum high contrast imaging testbed for CDEEP, the Coronagraphic Debris and Exoplanet Exploring Pioneer
2020
- Thermally formed inflatable reflectors for space telescopes
2020
- Design form classification of two-mirror unobstructed freeform telescopes
2020
- An insight on optical metrology in manufacturing
2020
- Development of Linear Astigmatism Free\textemdashThree Mirror System (LAF-TMS)
2020
- Five-channel fiber-based laser Doppler vibrometer for underwater acoustic field measurement
2020
- Transformable Reflective Telescope for optical testing and education
2020
- Computational alignment of on-machine deflectometry
2020
- In-process metrology for segmented optics UV curing control
2020
- Reconfigurable dynamic optical system design, test, and data analysis
2020
- Hyperion: Far-UV cross dispersion spectroscope design
2020
- Flight model characterization of the wide-field off-axis telescope for the MATS satellite
2020
- Robust and objective automatic optical surface inspection using modulated dark field phasing illumination
2019
- Freeform surface selection based on parametric fitness function using modal wavefront fitting
2019
- Modal Data Processing for High Resolution Deflectometry
2019
- Precision Optics Manufacturing and Control for Next-Generation Large Telescopes
2019
- Parametric geometry analysis for circular-aperture off-axis parabolic mirror segment
2019
- Utilizing freeform optics in dynamic optical configuration designs
2019
- Full Spectrum Big Data Analysis for Dynamic Freeform Optics Manufacturing
2019
- Infinite deflectometry enabling 2pi-steradian measurement range
2019
- Pseudorandom orbiting stroke for freeform optics postprocessing
2019
- Rectangular domain curl polynomial set for optical vector data processing and analysis
2019
- Programmatic Large Precision Optics Manufacturing
2019
- A Thousand Earths: A Very Large Aperture, Ultralight Space Telescope Array for Atmospheric Biosignature Surveys
2019
- Fabrication and Measurement of Large Scale Freeform Optics
2019
- Nautilus Observatory: a space telescope array based on very large aperture ultralight diffractive optical elements
2019
- Modular plug-in extension enabling cross-dispersed spectroscopy for Large Binocular Telescope
2019
- ExoPlanet Optics: conceptual design processes for stealth telescopes
2019
- Multi-field merit-function-based regression method for Wide Field Infrared Survey Telescope grism system alignment
2019
- Electrically-modulated optoelectronics-based infrared source enabling ground surface precision deflectometry
2019
- Modulated dark-field phasing detection for automatic optical inspection
2019
- Wide-Field Freeform Projection Lens/Module for Augmented Reality
2019
- Two-dimensional stitching interferometry for self-calibration of high-order additive systematic errors
2019
- High contrast thermal deflectometry using long-wave infrared time modulated integrating cavity source
2019
- Model-free deflectometry for freeform optics measurement using an iterative reconstruction technique
2018
- Infrared computer-generated holograms: design and application for the WFIRST grism using wavelength-tuning interferometry
2018
- Nautilus Deep Space Observatory: A Giant Segmented Space Telescope Array for a Galactic Biosignature Survey
2018
- Model-free optical surface reconstruction from deflectometry data
2018
- MEMS-based Imaging LIDAR
2018
- Optics technology for large-aperture space telescopes: from fabrication to final acceptance tests
2018
- Manufacture of primary mirror segments for the Giant Magellan Telescope
2018
- Closed-loop laser polishing using in-process surface finish metrology
2018
- Adaptive Shack-Hartmann wavefront sensor accommodating large wavefront variations
2018
- Closed-loop next generation laser polishing
2018
- An inexpensive turnkey 6.5m observatory with customizing options
2018
- Hafnium Films and Magnetic Shielding for TIME, A mm-Wavelength Spectrometer Array
2018
- Chebyshev gradient polynomials for high resolution surface and wavefront reconstruction
2018
- Simultaneous multi-segmented mirror orientation test system using a digital aperture based on sheared Fourier analysis
2017
- Simultaneous angular alignment of segmented mirrors using sinusoidal pattern analysis
2017
- Experimental power spectral density analysis for mid-to high-spatial frequency surface error control
2017
- Close-loop performance of a high precision deflectometry controlled deformable mirror (DCDM) unit for wavefront correction in adaptive optics system
2017
- Emerging technology for astronomical optics metrology
2017
- Fabrication and Dynamic Deflectometry Testing Methods for Freeform and Deformable Optics
2017
- Fabrication and Implementation of a New Ceramic Material in an Adaptive Optics System
2017
- Spherical reflectors for space based telescopes
2017
- Instantaneous phase mapping deflectometry for dynamic deformable mirror characterization
2017
- Dynamic metrology and data processing for precision freeform optics fabrication and testing
2017
- Manufacturing of super-polished large aspheric/freeform optics
2016
- Development of a program for toric intraocular lens calculation considering posterior corneal astigmatism, incision-induced posterior corneal astigmatism, and effective lens position
2016
- Adaptive interferometric null testing for unknown freeform optics metrology
2016
- Extremely Large, Precise and Priceless Freeform Optics
2016
- Status of mirror segment production for the Giant Magellan Telescope
2016
- Fabrication and testing of 4.2m off-axis aspheric primary mirror of Daniel K. Inouye Solar Telescope
2016
- Optical Metrology Systems Spanning the Full Spatial Frequency Spectrum
2016
- 30 years of mirror making at the Richard F. Caris Mirror Lab
2016
- Iterative surface construction for blind deflectometry
2016
- Manufacture and final tests of the LSST monolithic primary/tertiary mirror
2016
- New and improved technology for manufacture of GMT primary mirror segments
2016
- Ring-shaped dysphotopsia associated with posterior chamber phakic implantable collamer lenses with a central hole
2016
- Precise and fast spatial-frequency analysis using the iterative local Fourier transform
2016
- Instantaneous phase shifting deflectometry
2016
- Integrated Ray Tracing (IRT) simulation of SCOTS measurement of GMT fast steering mirror surface
2015
- Advances in diamond generating for 8.4 meter telescope mirrors
2015
- Integrated Ray Tracing simulation of the SCOTS surface measurement test for the GMT Fast Steering Mirror Prototype
2015
- Optical fabrication of lightweighted 3D printed mirrors
2015
- Extremely Large Freeform Optics Manufacturing and Testing
2015
- Advanced Technology Solar Telescope 4.2 m Off-axis Primary Mirror Fabrication
2014
- Process optimization for polishing large aspheric mirrors
2014
- New Phase Measuring Deflectometry Device for Mid-to-High Spatial Frequency Surface Metrology
2014
- Production of primary mirror segments for the Giant Magellan Telescope
2014
- Algorithms for surface reconstruction from curvature data for freeform aspherics
2013
- Correlation-based smoothing model for optical polishing
2013
- Steerable diffraction limited line illumination system using deformable mirror
2013
- Synthetic phase-shifting for optical testing: Point-diffraction interferometry without null optics or phase shifters
2013
- Optical surfacing process optimization using parametric smoothing model for mid-to-high spatial frequency error control
2013
- Super-smooth optical fabrication controlling high-spatial frequency surface irregularity
2013
- Use of thermal sieve to allow optical testing of cryogenic optical systems
2012
- SAGUARO: data analysis software for optical engineering
2012
- Control of mid-spatial-frequency errors for large steep aspheric surfaces
2012
- The Thermal Sieve: a diffractive baffle that provides thermal isolation of a cryogenic optical system from an ambient temperature collimator
2012
- Production of 8.4 m segments for the Giant Magellan Telescope
2012
- SAGUARO
2012
- Open source data analysis and visualization software for optical engineering
2012
- Open-source data analysis and visualization software platform: SAGUARO
2011
- New approach for pre-polish grinding with low subsurface damage
2011
- Calibration and optimization of computer-controlled optical surfacing for large optics
2011
- Parametric smoothing model for visco-elastic polishing tools
2010
- Integrated ray tracing simulation of annual variation of spectral bio-signatures from cloud free 3D optical Earth model
2010
- Fabrication and testing of the first 8.4-m off-axis segment for the Giant Magellan Telescope
2010
- Cryogenic Thermal Mask for Space-cold Optical Testing for Space Optical Systems
2010
- Interferometer calibration using the random ball test
2010
- Rigid conformal polishing tool using non-linear visco-elastic effect
2010
- Non-sequential optimization technique for a computer controlled optical surfacing process using multiple tool influence functions
2009
- Edge tool influence function library using the parametric edge model for computer controlled optical surfacing
2009
- Parametric modeling of edge effects for polishing tool influence functions
2009
- Parametric model for mirror deflection with axial support
2008
- Novel simulation technique for efficient fabrication of 2-m class hexagonal segments for extremely large telescope primary mirrors
2005
- Static tool influence function for fabrication simulation of hexagonal mirror segments for extremely large telescopes
2005